Chimney Flue Draught Excluder

£13.00

Universal chimney draught excluder. Prevents draughts from open chimneys .

117 in stock

EAN: 5017259011782 SKU: 743 Categories: ,

Why draught proof?

Your house or commercial property will lose heat during cold weather partly due to poor thermal insulation, but also due to the air-leakiness of the building. This warm air loss is technically known as infiltration or permeability and is measured in metres cubed per hour per square metre of floor area. A typical building built 1900 to 1990 will loose around 20-30 metres cubed of air per hour per square meter of floor area. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draft proofing could reduce your air permeability to around 8-10 metres cubed per hour which is a good low cost way of reducing you heating bills. The amount of air infiltration to your property will also depend on its exposure to wind so if you are on a hillside or near the coast then it is even more beneficial for you have good draught proofing.

Unused fire?

These Chimney draught excluders are designed to be pushed into the narrow part of the chimney above the fireplace, used when the fire is out and the central heating is on.

A huge amount of warm air is drawn up the chimney throughout the day which causes draughts in rooms and loss of heated air.

It has been calculated that for an average sized flue these chimney draught excluders can save you 23 per year off your heating bills for EACH chimney, with the added benefit of reducing draughts within rooms. If you have several chimneys then the savings will be much higher.

The Stormguard Universal Chimney Draught Excluder prevents heat loss from draughts up and down the chimney. With a high quality design, the excluder is easy to fit, with no tools required to install.

Technical specification:
Includes chimney draught excluder, valve and inflation tube
Rectangular shape for chimneys 100-700mm width x 100-400mm depth
Easy to fit, no tools required
Simply insert the draught excluder, open valve and inflate using the tube supplied
High quality, reusable design

These chimney draught excluders have the huge advantage over similar products in that they can be easily taken out and re-fitted each time the fire is lit. There are many buildings where fires may only be used on special occasions such as only over Christmas.

Other advantages, Can stop noise coming down your chimney; saves money, stops cold draughts coming down your chimney for example during windy days, stops debris falling down your chimney like soot and hailstones.

 

 

Weight 0.35 kg
Manufacturer

StormGuard

Reviews

There are no reviews yet.

Be the first to review “Chimney Flue Draught Excluder”